A humoral stress response protects Drosophila tissues from antimicrobial peptides.

7An efficient immune system must provide protection against a broad range of pathogens without causing excessive collateral tissue damage. While immune effectors have been well characterized, we know less about the resilience mechanisms protecting the host from its own immune response. Antimicrobial peptides (AMPs) are small, cationic peptides that contribute to innate defenses by targeting negatively charged membranes of microbes. While protective against pathogens, AMPs can be cytotoxic to host cells. Here, we reveal that a family of stress-induced proteins, the Turandots, protect the Drosophila respiratory system from AMPs, increasing resilience to stress. Flies lacking Turandot genes are susceptible to environmental stresses due to AMP-induced tracheal apoptosis. Turandot proteins bind to host cell membranes and mask negatively charged phospholipids, protecting them from cationic pore-forming AMPs. Collectively, these data demonstrate that Turandot stress proteins mitigate AMP cytotoxicity to host tissues and therefore improve their efficacy.

Hybrid Density Functional Valence Bond Method with Multistate Treatment.

Recently, a hybrid density functional valence bond (VB) method, λ-DFVB(U), has been proposed and shown to give accuracy that is comparable to that of CASPT2 in calculations of atomization energies, atomic excitation energies, and reaction barriers, while its computational cost is approximately the same as the valence bond self-consistent-field (VBSCF) method. However, the interaction between electronic states is not included in λ-DFVB(U) since the last step of λ-DFVB(U) is not a diagonalization of the Hamiltonian matrix on the electronic state basis. Therefore, λ-DFVB(U) gives the wrong topology of the potential energy surfaces (PESs) near the conical intersection region. In the present paper, we propose a novel hybrid density functional VB method with multistate treatment, named λ-DFVB(MS), in which an effective Hamiltonian matrix is constructed on the basis of the diabatic states obtained by the valence-bond-based compression approach for the diabatization scheme, and the interaction between electronic states can be included through the diagonalization of the effective Hamiltonian matrix. Test calculations show that λ-DFVB(MS) gives the correct topology of the PESs near the conical intersection region. We also show that the VBSCF wave function with selected VB structures can be applied as a reference in λ-DFVB(MS).

Deep Learning-Assisted Single-Molecule Detection of Protein Post-translational Modifications with a Biological Nanopore.

Protein post-translational modifications (PTMs) play a crucial role in countless biological processes, profoundly modulating protein properties on both spatial and temporal scales. Protein PTMs have also emerged as reliable biomarkers for several diseases. However, only a handful of techniques are available to accurately measure their levels, capture their complexity at a single molecule level, and characterize their multifaceted roles in health and disease. Nanopore sensing provides high sensitivity for the detection of low-abundance proteins, holding the potential to impact single-molecule proteomics and PTM detection, in particular. Here, we demonstrate the ability of a biological nanopore, the pore-forming toxin aerolysin, to detect and distinguish α-synuclein-derived peptides bearing single or multiple PTMs, namely, phosphorylation, nitration, and oxidation occurring at different positions and in various combinations. The characteristic current signatures of the α-synuclein peptide and its PTM variants could be confidently identified by using a deep learning model for signal processing. We further demonstrate that this framework can quantify α-synuclein peptides at picomolar concentrations and detect the C-terminal peptides generated by digestion of full-length α-synuclein. Collectively, our work highlights the advantage of using nanopores as a tool for simultaneous detection of multiple PTMs and facilitates their use in biomarker discovery and diagnostics.

Self-Assembled L-DNA Linkers for Rapid Construction of Multi-Specific Antibody-Drug Conjugates Library.

One of the key challenges of improving clinical outcomes of antibody drug conjugates (ADCs) is overcoming cancer resistance to the antibody and/or drug components of ADCs, and hence the need for ADC platforms with high combinatory flexibility. Here, we introduce the use of self-assembled left-handed DNA (L-DNA) oligonucleotides to link combinatory single-domain antibodies and toxin payloads for tunable and adaptive delivery of ADCs. We demonstrate that the method allows convenient construction of a library of ADCs with multi-specific targeting, multi-specific payloads, and exact drug-antibody ratio. The newly constructed ADCs with L-DNA scaffold showed favorable properties of in vitro cell cytotoxicity and in vivo suppression and eradication of solid tumors. Collectively, our data suggest that the L-DNA based modular ADC (MADC) platform is a viable option for generating therapeutic ADCs and for potentially expanding ADC therapeutic window via multi-specificity.

Biological nanopores for single-molecule sensing.

Evolution has found countless ways to transport material across cells and cellular compartments separated by membranes. Protein assemblies are the cornerstone for the formation of channels and pores that enable this regulated passage of molecules in and out of cells, contributing to maintaining most of the fundamental processes that sustain living organisms. As in several other occasions, we have borrowed from the natural properties of these biological systems to push technology forward and have been able to hijack these nano-scale proteinaceous pores to learn about the physical and chemical features of molecules passing through them. Today, a large repertoire of biological pores is exploited as molecular sensors for characterizing biomolecules that are relevant for the advancement of life sciences and application to medicine. Although the technology has quickly matured to enable nucleic acid sensing with transformative implications for genomics, biological pores stand as some of the most promising candidates to drive the next developments in single-molecule proteomics.

The emerging landscape of single-molecule protein sequencing technologies.

Single-cell profiling methods have had a profound impact on the understanding of cellular heterogeneity. While genomes and transcriptomes can be explored at the single-cell level, single-cell profiling of proteomes is not yet established. Here we describe new single-molecule protein sequencing and identification technologies alongside innovations in mass spectrometry that will eventually enable broad sequence coverage in single-cell profiling. These technologies will in turn facilitate biological discovery and open new avenues for ultrasensitive disease diagnostics.

Aerolysin nanopores decode digital information stored in tailored macromolecular analytes.

Digital data storage is a growing need for our society and finding alternative solutions than those based on silicon or magnetic tapes is a challenge in the era of "big data." The recent development of polymers that can store information at the molecular level has opened up new opportunities for ultrahigh density data storage, long-term archival, anticounterfeiting systems, and molecular cryptography. However, synthetic informational polymers are so far only deciphered by tandem mass spectrometry. In comparison, nanopore technology can be faster, cheaper, nondestructive and provide detection at the single-molecule level; moreover, it can be massively parallelized and miniaturized in portable devices. Here, we demonstrate the ability of engineered aerolysin nanopores to accurately read, with single-bit resolution, the digital information encoded in tailored informational polymers alone and in mixed samples, without compromising information density. These findings open promising possibilities to develop writing-reading technologies to process digital data using a biological-inspired platform.

Single-molecule studies of amyloid proteins: from biophysical properties to diagnostic perspectives.

In neurodegenerative diseases, a wide range of amyloid proteins or peptides such as amyloid-beta and α-synuclein fail to keep native functional conformations, followed by misfolding and self-assembling into a diverse array of aggregates. The aggregates further exert toxicity leading to the dysfunction, degeneration and loss of cells in the affected organs. Due to the disordered structure of the amyloid proteins, endogenous molecules, such as lipids, are prone to interact with amyloid proteins at a low concentration and influence amyloid cytotoxicity. The heterogeneity of amyloid proteinscomplicates the understanding of the amyloid cytotoxicity when relying only on conventional bulk and ensemble techniques. As complementary tools, single-molecule techniques (SMTs) provide novel insights into the different subpopulations of a heterogeneous amyloid mixture as well as the cytotoxicity, in particular as involved in lipid membranes. This review focuses on the recent advances of a series of SMTs, including single-molecule fluorescence imaging, single-molecule force spectroscopy and single-nanopore electrical recording, for the understanding of the amyloid molecular mechanism. The working principles, benefits and limitations of each technique are discussed and compared in amyloid protein related studies.. We also discuss why SMTs show great potential and are worthy of further investigation with feasibility studies as diagnostic tools of neurodegenerative diseases and which limitations are to be addressed.

Structural Characterization of the N-Terminal Domain of the Dictyostelium discoideum Mitochondrial Calcium Uniporter.

The mitochondrial calcium uniporter (MCU) plays a critical role in mitochondrial calcium uptake into the matrix. In metazoans, the uniporter is a tightly regulated multicomponent system, including the pore-forming subunit MCU and several regulators (MICU1, MICU2, and Essential MCU REgulator, EMRE). The calcium-conducting activity of metazoan MCU requires the single-transmembrane protein EMRE. Dictyostelium discoideum (Dd), however, developed a simplified uniporter for which the pore-forming MCU (DdMCU) alone is necessary and sufficient for calcium influx. Here, we report a crystal structure of the N-terminal domain (NTD) of DdMCU at 1.7 Å resolution. The DdMCU-NTD contains four helices and two strands arranged in a fold that is completely different from the known structures of other MCU-NTD homologues. Biochemical and biophysical analyses of DdMCU-NTD in solution indicated that the domain exists as high-order oligomers. Mutagenesis showed that the acidic residues Asp60, Glu72, and Glu74, which appeared to mediate the interface II, as observed in the crystal structure, participated in the self-assembly of DdMCU-NTD. Intriguingly, the oligomeric complex was disrupted in the presence of calcium. We propose that the calcium-triggered dissociation of NTD regulates the channel activity of DdMCU by a yet unknown mechanism.

DNA-Mediated Assembly of Multispecific Antibodies for T Cell Engaging and Tumor Killing.

Targeting T-cells against cancer cells is a direct means of treating cancer, and has already shown great responses in clinical treatment of B-cell malignancies. A simple way to redirect T-cells to cancer cells is by using multispecific antibody (MsAb) that contains different arms for specifically "grabbing" the T-cells and cancer cells; as such, the T-cells are activated upon target engagement and the killing begins. Here, a nucleic acid mediated protein-protein assembly (NAPPA) approach is implemented to construct a MsAb for T-cell engaging and tumor killing. Anti -CD19 and -CD3 single-chain variable fragments (scFvs) are conjugated to different l-DNAs with sequences that form the Holliday junction, thus allowing spontaneous assembly of homogeneous protein-DNA oligomers containing two anti-CD19 and one anti-CD3 scFvs. The new MsAb shows strong efficacy in inducing Raji tumor cell cytotoxicity in the presence of T-cells with EC50 ≈ 0.2 × 10-9 m; it also suppresses tumor growth in a Raji xenograft mouse model. The data indicates that MsAbs assembled from protein-DNA conjugates are effective macromolecules for directing T-cells for tumor killing. The modular nature of the NAPPA platform allows rapid generation of complex MsAbs from simple antibody fragments, while offering a general solution for preparing antibodies with high-order specificity.

Single-molecule sensing of peptides and nucleic acids by engineered aerolysin nanopores.

Nanopore sensing is a powerful single-molecule approach for the detection of biomolecules. Recent studies have demonstrated that aerolysin is a promising candidate to improve the accuracy of DNA sequencing and to develop novel single-molecule proteomic strategies. However, the structure-function relationship between the aerolysin nanopore and its molecular sensing properties remains insufficiently explored. Herein, a set of mutated pores were rationally designed and evaluated in silico by molecular simulations and in vitro by single-channel recording and molecular translocation experiments to study the pore structural variation, ion selectivity, ionic conductance and capabilities for sensing several biomolecules. Our results show that the ion selectivity and sensing ability of aerolysin are mostly controlled by electrostatics and the narrow diameter of the double ß-barrel cap. By engineering single-site mutants, a more accurate molecular detection of nucleic acids and peptides has been achieved. These findings open avenues for developing aerolysin nanopores into powerful sensing devices.

Mapping the sensing spots of aerolysin for single oligonucleotides analysis.

Nanopore sensing is a powerful single-molecule method for DNA and protein sequencing. Recent studies have demonstrated that aerolysin exhibits a high sensitivity for single-molecule detection. However, the lack of the atomic resolution structure of aerolysin pore has hindered the understanding of its sensing capabilities. Herein, we integrate nanopore experimental results and molecular simulations based on a recent pore structural model to precisely map the sensing spots of this toxin for ssDNA translocation. Rationally probing ssDNA length and composition upon pore translocation provides new important insights for molecular determinants of the aerolysin nanopore. Computational and experimental results reveal two critical sensing spots (R220, K238) generating two constriction points along the pore lumen. Taking advantage of the sensing spots, all four nucleobases, cytosine methylation and oxidation of guanine can be clearly identified in a mixture sample. The results provide evidence for the potential of aerolysin as a nanosensor for DNA sequencing.

Identification of Essential Sensitive Regions of the Aerolysin Nanopore for Single Oligonucleotide Analysis.

The aerolysin nanopore channel is one of the confined spaces for single molecule analysis which displays high spatial and temporal resolution for the discrimination of single nucleotides, identification of DNA base modification, and analyzing the structural transition of DNAs. However, to overcome the challenge of achieving the ultimate goal of the widespread real analytical application, it is urgent to probe the sensing regions of the aerolysin to further improve the sensitivity. In this paper, we explore the sensing regions of the aerolysin nanopore by a series of well-designed mutant nanopore experiments combined with molecular dynamics simulations-based electrostatic analysis. The positively charged lumen-exposed Lys-238, identified as one of the key sensing sites due to the presence of a deep valley in the electrostatic potentials, was replaced by different charged and sized amino acids. The results show that the translocation time of oligonucleotides through the nanopore can be readily modulated by the choice of the target amino acid at the 238 site. In particular, a 7-fold slower translocation at a voltage bias of +120 mV is observed with respect to the wild-type aerolysin, which provides a high resolution for methylated cytosine discrimination. We further determine that both the electrostatic properties and geometrical structure of the aerolysin nanopore are crucial to its sensing ability. These insights open ways for rationally designing the sensing mechanism of the aerolysin nanopore, thus providing a novel paradigm for nanopore sensing.

Rationally Designed Sensing Selectivity and Sensitivity of an Aerolysin Nanopore via Site-Directed Mutagenesis.

Selectivity and sensitivity are two key parameters utilized to describe the performance of a sensor. In order to investigate selectivity and sensitivity of the aerolysin nanosensor, we manipulated its surface charge at different locations via single site-directed mutagenesis. To study the selectivity, we replaced the positively charged R220 at the entrance of the pore with negatively charged glutamic acid, resulting in barely no current blockages for sensing negatively charged oligonucleotides. For the sensitivity, we substituted the positively charged lumen-exposed amino acid K238 located at trans-ward third of the ß-barrel stem with glutamic acid. This leads to a surprisingly longer duration time at +140 mV, which is about 20 times slower in translocation speed for Poly(dA)4 compared to that of wild-type aerolysin, indicating the stronger pore-analyte interactions and enhanced sensitivity. Therefore, it is both feasible and understandable to rationally design confined biological nanosensors for single molecule detection with high selectivity and sensitivity.

A General Strategy of Aerolysin Nanopore Detection for Oligonucleotides with the Secondary Structure.

An aerolysin nanopore is employed as a sensitive tool for single-molecule analysis of short oligonucleotides (≤10 nucleotides), poly(ethylene glycol) (PEGs), peptides, and proteins. However, the direct analysis of long oligonucleotides with the secondary structure (e.g., G-quadruplex topology) remains a challenge, which impedes the further practical applications of the aerolysin nanopore. Here, a simple and applicable method of aerolysin nanopore is presented to achieve a direct analysis of structured oligonucleotides that are extended to 30 nucleotides long by a cation-regulation mechanism. By regulating the cation type in electrolyte solution, the structured oligonucleotides are unfolded into linear form which ensures the successive translocation. The results show that each model oligonucleotide of 5'-(TTAGGG)n -3' can produce a well-resolved current blockade in its unfolded solution of MgCl2 . The length between 6 and 30 nucleotides long of model oligonucleotides is proportional to the duration time, showing a translocation velocity as low as 0.70-0.13 ms nt-1 at +140 mV. This method exhibits an excellent sensitivity and a sufficient temporal resolution, provides insight into the aerolysin nanopore methodology for genetic and epigenetic biosensing, making aerolysin applicable in practical diagnosing with long and structured nucleic acids.

Real-Time and Accurate Identification of Single Oligonucleotide Photoisomers via an Aerolysin Nanopore.

Identification of the configuration for the photoresponsive oligonucleotide plays an important role in the ingenious design of DNA nanomolecules and nanodevices. Due to the limited resolution and sensitivity of present methods, it remains a challenge to determine the accurate configuration of photoresponsive oligonucleotides, much less a precise description of their photoconversion process. Here, we used an aerolysin (AeL) nanopore-based confined space for real-time determination and quantification of the absolute cis/ trans configuration of each azobenzene-modified oligonucleotide (Azo-ODN) with a single molecule resolution. The two completely separated current distributions with narrow peak widths at half height (<0.62 pA) are assigned to cis/ trans-Azo-ODN isomers, respectively. Due to the high current sensitivity, each isomer of Azo-ODN could be undoubtedly identified, which gives the accurate photostationary conversion values of 82.7% for trans-to- cis under UV irradiation and 82.5% for cis-to- trans under vis irradiation. Further real-time kinetic evaluation reveals that the photoresponsive rate constants of Azo-ODN from trans-to- cis and cis-to -trans are 0.43 and 0.20 min-1, respectively. This study will promote the sophisticated design of photoresponsive ODN to achieve an efficient and applicable photocontrollable process.

Biological Nanopores: Confined Spaces for Electrochemical Single-Molecule Analysis.

Nanopore sensing is developing into a powerful single-molecule approach to investigate the features of biomolecules that are not accessible by studying ensemble systems. When a target molecule is transported through a nanopore, the ions occupying the pore are excluded, resulting in an electrical signal from the intermittent ionic blockade event. By statistical analysis of the amplitudes, duration, frequencies, and shapes of the blockade events, many properties of the target molecule can be obtained in real time at the single-molecule level, including its size, conformation, structure, charge, geometry, and interactions with other molecules. With the development of the use of α-hemolysin to characterize individual polynucleotides, nanopore technology has attracted a wide range of research interest in the fields of biology, physics, chemistry, and nanoscience. As a powerful single-molecule analytical method, nanopore technology has been applied for the detection of various biomolecules, including oligonucleotides, peptides, oligosaccharides, organic molecules, and disease-related proteins. In this Account, we highlight recent developments of biological nanopores in DNA-based sensing and in studying the conformational structures of DNA and RNA. Furthermore, we introduce the application of biological nanopores to investigate the conformations of peptides affected by charge, length, and dipole moment and to study disease-related proteins' structures and aggregation transitions influenced by an inhibitor, a promoter, or an applied voltage. To improve the sensing ability of biological nanopores and further extend their application to a wider range of molecular sensing, we focus on exploring novel biological nanopores, such as aerolysin and Stable Protein 1. Aerolysin exhibits an especially high sensitivity for the detection of single oligonucleotides both in current separation and duration. Finally, to facilitate the use of nanopore measurements and statistical analysis, we develop an integrated current measurement system and an accurate data processing method for nanopore sensing. The unique geometric structure of a biological nanopore offers a distinct advantage as a nanosensor for single-molecule sensing. The construction of the pore entrance is responsible for capturing the target molecule, while the lumen region determines the translocation process of the single molecule. Since the capture of the target molecule is predominantly diffusion-limited, it is expected that the capture ability of the nanopore toward the target analyte could be effectively enhanced by site-directed mutations of key amino acids with desirable groups. Additionally, changing the side chains inside the wall of the biological nanopore could optimize the geometry of the pore and realize an optimal interaction between the single-molecule interface and the analyte. These improvements would allow for high spatial and current resolution of nanopore sensors, which would ensure the possibility of dynamic study of single biomolecules, including their metastable conformations, charge distributions, and interactions. In the future, data analysis with powerful algorithms will make it possible to automatically and statistically extract detailed information while an analyte translocates through the pore. We conclude that these improvements could have tremendous potential applications for nanopore sensing in the near future.

Direct Readout of Single Nucleobase Variations in an Oligonucleotide.

Direct, low-cost, label-free, and enzyme-free identification of single nucleobase is a great challenge for genomic studies. Here, this study reports that wild-type aerolysin can directly identify the difference of four types of single nucleobase (adenine, thymine, cytosine, and guanine) in a free DNA oligomer while avoiding the operations of additional DNA immobilization, adapter incorporation, and the use of the processing enzyme. The nanoconfined space of aerolysin enables DNA molecules to be limited in the narrow pore. Moreover, aerolysin exhibits an unexpected capability of detecting DNA oligomers at the femtomolar concentration. In the future, by virtue of the high sensitivity of aerolysin and its high capture ability for DNA oligomers, aerolysin will play an important role in the studies of single nucleobase variations and open up new avenues for a broad range of nucleic-acid-based sensing and disease diagnosis.